Hunter 50AC 2007 - tuning mast and standing rigging

Oct 28, 2021
23
Hunter 50 AC Naples
Hi all,

I'm about to replace the original standing rigging on my 2007 Hunter 50 AC (aft cockpit) and I'm looking for anyone with first-hand experience or data on tuning this rig, conventional mainsail (no in-mast furling)-

In particular I'd be grateful for:
- Rake and prebend figures that worked well on a Hunter 49/50
- Shroud tensions for V1, D1, D2/D3 and the reverse diagonals
- The original Hunter/Selden rigging plan with wire sizes and pin-to-pin lengths, if anyone has a copy
- Anything you learned the hard way when re-rigging or re-tuning this mast

Thanks in advance,

Gianni
 

jssailem

SBO Weather and Forecasting Forum Jim & John
Oct 22, 2014
24,937
CAL 35 Cruiser #21 moored EVERETT WA
I would identify the tension, rake, and prebend data on your rig before any removal of the rig. That way, you can put the new rigging tuned "closely" to the old rig. Then you can make finite adjustments when sailing the new rigging. Rigging is pretty much standard, then when assembled, it is sailed and fine-tuned.