Hunter 320 bimini & dodger help

[bensdad]

I just bought a 2000 320 and love it1

The previous owner had the stainless steel framework for the bimini and dodger in his garage - he never used them. He had the canvas components for the dodger but not the bimini.

Here's my point: If I had a picture as a reference of someone's 320 with dodger and bimini installed, I'd be able to figure out how to assemble and install the dodger and erect the bimini framework so we can get some measurements for canvas.

If anyone has a picture of a 320 with bimini and dodger installed, please share them with me. Ideally, pictures from several angles so I can see all the joints and struts.

Thanks for any help.

 

[Deadline]

Pix are on this website

Go to the tab "Boat Info" and scroll down to 320. Then click onto pictures. The boat Pax has a bimini going full bore over the boat.

I removed my forward rails and only use a bimini from the traveler rail to the rear rail. The traveler enables you to use a bolt rope connection that slides the bimini in from the side. Then it curves around the other rail and zippers underneath. I think there are only six snaps altogether.

The tolerances are such that I would recommend a canvas pro do it. The margin of error is so slight as to annoy you to no end if it's slightly off.

Love my 320 as well. If you want direx on an inexpensive bowsprit to fly the spinnaker, email me at bodonovan@vagazette.com