If anyone could provide me with the dimensions of a cradle for a Hunter 31 (84) I would really appreciate it. Also especally need the post heights Thanks
Hunter 31 Cradle Dimensions
- Thread starter gr8 2 av8
- Start date
- Status
Cradle dimensions
I measured my cradle last weekend. All of my measurements are from the center of the uprights which are 3" steel pipe. 5' wide at base fore and aft. 5' wide at top aft and 45" wide at top in the bow. bow___o-----6'2"---o-----5'5"----o_____stern bow___|...................................| bow___|...................................| bow___|...................................| bow___|...................................| bow___|...................................| bow___o------------o------------o The o are upright posts. The periods are just for spacing. My keel is 4'3 1/2" deep and sits on a 2"x8" board in a trough in the base of the cradle. I took a few photos that might help. The photo that I attached shows how the front two posts on the cradle angle in toward the center. Email if you want more photos or more explanation of the diagram. rip@deltahawkengines.com
I measured my cradle last weekend. All of my measurements are from the center of the uprights which are 3" steel pipe. 5' wide at base fore and aft. 5' wide at top aft and 45" wide at top in the bow. bow___o-----6'2"---o-----5'5"----o_____stern bow___|...................................| bow___|...................................| bow___|...................................| bow___|...................................| bow___|...................................| bow___o------------o------------o The o are upright posts. The periods are just for spacing. My keel is 4'3 1/2" deep and sits on a 2"x8" board in a trough in the base of the cradle. I took a few photos that might help. The photo that I attached shows how the front two posts on the cradle angle in toward the center. Email if you want more photos or more explanation of the diagram. rip@deltahawkengines.com
- Status