Not familiar with or have we seen any reference to this on the Internet. Not a trailer sailor but will need to eventually raise and lower the mast once we find a 260. Get the mast up, the boat in the water and anchored at our mooring. My concern is that it does not appear to be difficult other than preventing the mast from swinging laterally in the process, thus taking 2 more people to assist. I image there would be some sort of temporary sling or line assembly guide on the mast to prevent the mast from swinging and tearing itself off the mast attachment plate. Also assume we need snap down mast rigging line attachments so that once this rigging is tuned, we'll not have to repeat this process when lowering and raising the mast in the future.
Any advise regarding this concern of ours would be helpful
Any advise regarding this concern of ours would be helpful