Hood Roller Furler - foils & headstay extrusions??

[Bob Pullen HC-33 1981]

I'm looking for the foil(s) or luff extrusions that go up a forestay, for the Hood Seafurl 700SL or 705SD. If anyone knows if they can be found, or if other parts will substitute, please advise. Your suggestions and advice will be greatly appreciated, as they have been in the past! I currently have an old (probably the original)CDI Reefer on a Hunter Cherubini 33 ('81) with all working parts, but getting very cranky. Many thanks.Bob Pullen

 

[Barnacle Bill]

You can buy them below:

Pompanette Marine in Florida is the supplier of all Hood Roller Furling system parts.

 

[Steve O.]

Hood extrusions

www.pompanette.com

 

[Bob Pullen HC-33 1981]

Hood Furler Headstay Extrusions / Foil

I should have added that I have spoken to Pompanette, and they do not supply the foil extrusions anymore, nor do they know where they can be found! I am trying to find out if anyone knows if there are any substitutes or any 3rd party OEM that might be supplying them?thanksBob

 

[Moody Buccaneer]

What do you need?

What exactly do you need?Post a list of parts that you need and I'll look around.Randy

 

[Bob Pullen HC-33 1981]

Randy...extrusions, joint connectors, etc

I have all the parts listed in the parts diagram as listed in the link supplied belowhttp://www.pompanette.com/pompweb.nsf/abd7b90a2db9f5c0852567b300163588/66e0d7f34226ccae85256842006c5dc5?OpenDocumentincluding the continuous line.I need everything else...the luff extrusions and the joints that join the luff extrusion sections.All for a Hood 705 Seafurl LDthanks very much for your helpBob

 

[Moody Buccaneer]

Hey Bob

We need to take this off the forum.randy (dot) hough (at) shaw (dot) caYou do know that you are looking at over $1000 worth of parts, right?

 

[Nereussailor]

Hey Bob

There is a chance I might have a couple of foil extrusions and the connectors. I'll check to see if they are the right parts and post again tommorrow. Dave

 

[Bob Pullen HC-33 1981]

Thanks Dave.

If you'd like, you may reach me direct at pullenbob at yahoo dot comI do appreciate your time and effort.all the bestBob Pullen