Holly & Teak floor laminent

Status
Not open for further replies.
oceansail0

oceansail0

.
Feb 9, 2007
35
Freedom 21 Forked River, NJ
I have to replace the floor leading to the port aft berth on my 1984 h31 due to a leak. Does anyone have a lead on getting replacement Holly & Teak laminent that is used on the Marine Plywood? Has anyone replace the plywood with planking instead? How does it hold up and look?
 
S

Steve Dion

.
Dec 2, 1999
15,184
Hunter Vision-36 Rio Vista, CA.
Check out a product like Loncoin

Check out a product like Loncoin. I believe that it is make by Pirelli Tires. This product can be glued down with spray contact cement. It is very durable and is much easier than dealing with teak/holly again.
 
Rick D

Rick D

.
Jun 14, 2008
7,188
Hunter Legend 40.5 Shoreline Marina Long Beach CA
Another Option

See this thread too. RD
 
F

Fred

Try sanding it first. It might clean up

better than you think. If it stays dark, try one of the teak brighteners. Another approach is to paint it with a good grade of alkyd porch and floor enamel with a bit of nonskid in it.
 
B

Barry Rogers

Call Teak Decking Systems in Florida

Teak Decking Systems in Florida manufacture teak decks and teak floors for large vessels. They have a consumer shop out front that sells teak and teak plywood panels in smaller than 4 x 8 sizes. Call them and ask for Chuck (Manager). He might be able to help you. You can reach them at 1-941-755- 5887. They are in Sarasota, FL Email them at www.teackdecking.com
 
oceansail0

oceansail0

.
Feb 9, 2007
35
Freedom 21 Forked River, NJ
Sanded It

I took a Belt sander to the floor and it came up beautiful. I then covered it with a clear coat and am good to go. Thanks for all your inputs.
 
Status
Not open for further replies.

Top Bottom