holding tanks monitors
- Thread starter JeanGuy Bourgeois
- Start date
- Status
I installed the Scad 1-8 tank monitor.
External sensor on the holding tank and Internal sensors on the 2 water tanks on My B352.
Almost got stuck in the small compartment at the stern where the holding tank is located.
http://shop.sailnet.com/scad-profil...tor-water-waste-fuel-tanks-10019-p-47913.html
External sensor on the holding tank and Internal sensors on the 2 water tanks on My B352.
Almost got stuck in the small compartment at the stern where the holding tank is located.
http://shop.sailnet.com/scad-profil...tor-water-waste-fuel-tanks-10019-p-47913.html
Scad actually just private labels the Profile gauges
They're actually made by this company: http://ferriellosales.com/ (Dennis makes great products but he ain't no web designer!
) The Profile gauges under the Scad brand name were rated #1 by Practical Sailor a couple of years ago. A bunch of people here have bought them directly from Dennis Ferriello...his prices are great and his customer service is the best on the planet.
Click on "Monitoring Systems" to see the full line. If you only need a single tank monitor, you don't have to buy a system that take up 8 tanks...check out the "solo" model.
They're actually made by this company: http://ferriellosales.com/ (Dennis makes great products but he ain't no web designer!
) The Profile gauges under the Scad brand name were rated #1 by Practical Sailor a couple of years ago. A bunch of people here have bought them directly from Dennis Ferriello...his prices are great and his customer service is the best on the planet. Click on "Monitoring Systems" to see the full line. If you only need a single tank monitor, you don't have to buy a system that take up 8 tanks...check out the "solo" model.
I'll say. If I could find the single tank monitor and how much it costs, I might even think about ordering one.(Dennis makes great products but he ain't no web designer!
You cannot beat the Hart tank monitor for ease of use and installation.
I installed the Scad profile on my old boat and it worked great. My new boat came with the Hart tank monitor which also works great and uses no electricity.
I installed the Scad profile on my old boat and it worked great. My new boat came with the Hart tank monitor which also works great and uses no electricity.
Stand by...I've just emailed Dennis to jump into this thread
He should be along shortly.
Roger:
Just reading the posts and see my name mentioned. You want a single tank monitor that works well ours does. Right now our single tank is used by Catalina, C&C, Tartan, Legacy and others who also use our 8 tank monitor.
Head over to my site, www.ferriellosales.com, order the solo full alert and the sensor you need, if you like emiail me with your phone & I will talk to you, dennis@ferriellosales.com, I also have special pricing for this group.
Thanks for listening
Dennis
Just reading the posts and see my name mentioned. You want a single tank monitor that works well ours does. Right now our single tank is used by Catalina, C&C, Tartan, Legacy and others who also use our 8 tank monitor.
Head over to my site, www.ferriellosales.com, order the solo full alert and the sensor you need, if you like emiail me with your phone & I will talk to you, dennis@ferriellosales.com, I also have special pricing for this group.
Thanks for listening
Dennis
Higgs:
On our solo unit as well as our 8 tank, YOU set the point you want to get a warning. ON the solo full alert for waste tanks you get a warning at 85% of where you calibrated the full so you can raise and lower the warning point. You don't need to push the read button to get this warning the panel checks the tank every 20 minutes.
You can push the read button at any time to get the current reading
Again go to my site www.ferriellosales.com and if you like first email me on my contact page, make sure your email address is there and phone and I will call you.
Also is any Hunter owner has the old Snake River UTRA panel, we have our 8 tank panel in 2 sizes, the 7.0 to replace the Ultra in the Hunters and our standard 6.0 for others. This is the panel width, 7 inchs & 6 inches.
Also as always there is special pricing for this forum, ask me when we talk.
Dennis
dennis@ferriellosales.com
On our solo unit as well as our 8 tank, YOU set the point you want to get a warning. ON the solo full alert for waste tanks you get a warning at 85% of where you calibrated the full so you can raise and lower the warning point. You don't need to push the read button to get this warning the panel checks the tank every 20 minutes.
You can push the read button at any time to get the current reading
Again go to my site www.ferriellosales.com and if you like first email me on my contact page, make sure your email address is there and phone and I will call you.
Also is any Hunter owner has the old Snake River UTRA panel, we have our 8 tank panel in 2 sizes, the 7.0 to replace the Ultra in the Hunters and our standard 6.0 for others. This is the panel width, 7 inchs & 6 inches.
Also as always there is special pricing for this forum, ask me when we talk.
Dennis
dennis@ferriellosales.com
- Status