Help Finding Kanzaki Marine Gear Oil Seal

GorillaToast

GorillaToast

.
Sep 2, 2011
1,041
Hunter 27 Cherubini Alum Creek State Park
Im in the process of rebuilding a Kanzaki KM2A marine gear. The last thing I need is to get a new output shaft seal. The original is a Koyo CR MHSA 24 44 8.

Do you know of a local Yanmar dealer that would be able to get one of these for me? I've contacted Yanmar, Leboarde, Mack-Boring, plus several online oil seal distributors, and none will sell retail, or either don't carry that size. The local dealers I've tried off the Yanmar site, either aren't open this time of the year, or their phones are disconnected.

Getting frustrated!
 
GorillaToast

GorillaToast

.
Sep 2, 2011
1,041
Hunter 27 Cherubini Alum Creek State Park
Never mind. After 4 days searching I finally found a local dealer in Kemah Tx to sell a couple to me.
Whew!! Merry Christmas, Bill
 
centerline

centerline

.
Mar 20, 2012
3,983
Cal 34-III, MacGregor 25 Salem, Oregon
GorillaToast said:
Im in the process of rebuilding a Kanzaki KM2A marine gear. The last thing I need is to get a new output shaft seal. The original is a Koyo CR MHSA 24 44 8.

Do you know of a local Yanmar dealer that would be able to get one of these for me? I've contacted Yanmar, Leboarde, Mack-Boring, plus several online oil seal distributors, and none will sell retail, or either don't carry that size. The local dealers I've tried off the Yanmar site, either aren't open this time of the year, or their phones are disconnected.

Getting frustrated!
Click to expand
the seal seems to be readily available from almost any seal/bearing distributer.... my cost from my supplier is $4.74 and they have many in stock.... let me know if you need me to ship you one.
 
You must log in or register to reply here.

Top Bottom