Head Stay Mast Mount

[Tim]

I have an H-26 with a CDI Flexible Furler. I bought the boat used and it did not come with the proper mast end mount. It has a stem ball type fitting and all that was on the boat was the spherical socket on the mast but not the clamp. So far I have discovered that CDI has nothing to do with the mount. I am missing a clamp piece that mounts to the mast. The local dealer is trying to find out what I am missing and if it is available. I should have known better but I screwed in a bracket that almost prevented the head stay stem ball from comming out. Almost, I suffered a dismasting while motoring in rough conditions. Fortunatly I suffered only hardware failure and my wife is OK. Now I need the stem ball fitting AND a mast shoe AND gooseneck bushings for a 1994 H-26 (Isomat) spars. Any ideas?

 

[Ray Bowles]

Tim, I brought Speedy home to sell her so I will

look at the set up on her in the morning and see it I can be of any help. It is a 95 H26 with the same rigging. I'll take the West Marine manual in hand and look it over. Talk to you tommorrow.RayS/V Speedy

 

[Crazy Dave Condon]

parts

Isomat is long gone. However, you can get parts for your mast through Charleston Spar located in Charlotte, NC whose phone is 7-4-597-1502. as for the rigging, Seco South made it and that is a source for rigging parts and thier phone is 727-536-1924 and ask for Jean.Your description was not clear to me bbut were you talking about the forestay attachment on the mast? If so, please put on a new post to "Mast-Crazy Dave"Crazy Dave Condon