Head Liner

[Larry and Carol Schroeder]

This is only the second year in the water, and we keep pushing the headliner up frequently in several places. Does anyone else have this problem? Hate to use anything "permanent" to keep it up there, but it's getting very annoying to look up and see it working its way loose all the time.s/v Third Bird~ ~ _/) ~ ~

 

[Steve]

Small Screws....

Carol/Larry,The head liner is held in place by a few (very few) small wood screws. The teak strips can be pried loose (they are only held in place by tension on the ends) and that will reveal the screws. I would guess that they may be missing or stripped out. Try placing a couple more in the edges and then putting the teak strip back in. That should take care of the problem.Steve

 

[Rick Belew sv Yes Yes Yes]

Ditto Steve

I inspected my liner and the screws were screwed in poorly at best. Most of the screw were present but just thrown up. Reinstall screws but the port liner is installed a little different I can not remember for sure but I believe it has a mounted lip that the liner hook over to hold the first piece. The wooden teak strips can be removed by prying out one end and pulling downward. I hope this helps.

 

[Larry and Carol Schroeder]

Thanks

We'll try that this weekend.