Have to change some harken parts

  • Thread starter Ricxhard Lecavalier
  • Start date
Status
Not open for further replies.
R

Ricxhard Lecavalier

Some alu extrusion 7 feet sections of my Harken headstay furler where dammaged by ice on my 1983H34, the boat is far from home, and I need to know the diameter of the stay wire in order to get the whright parts Thanks in advance....Richard....
 
P

Patrick Ewing

Some of those extrusions are available at

Admiralty Marine in Seattle. They are cheap I think. email adm-rick@admiraltymarine.com Sorry - I don't know the size of the forestay.
 
C

Claude L.-Auger

Stay wire diameter

Salut Richard I happen to have taken the stay of my 84 H34 home to also do some repairs this winter. Just went to measure it. The stay itself measures at .292/.293, which would convert to about 5/16. However, the fitted end that attaches to the turnbuckle measures .620 in its widest section. That would be close to 5/8 and that's the part that you will have to fit through the sections. Good Luck
 
Status
Not open for further replies.

Top Bottom