Halyards

T

Thomas Kummer

.
Oct 30, 2019
4
Hello,can anyone tell me the length of the halyards of an Albin Vega 1978, I will have to change them.If you even know where I could get them (in Europe) it would be best.Thanks for advice.
Th. Kummer - architecte EPFL/SIA - tel: +4121 866 74 23 - mobile: +4179 413 60 35archikum@...
 
J

jam9991

.
Apr 3, 2016
12
There is an article that tells all .it linked from the association website just google albin vega line lengths Sent from my iPhone
 
H

halandcindy

.
Nov 4, 2016
62
If you run your halyards to the cockpit, which makes single handing much easier, then you need to add more than ten feet. Two fairleads and a winch on either side of the hatch with an attending cleat makes a good system to haul sails from where the tiller is! Hal Kearsley
 
P

pelagicasd

.
Jan 28, 2001
694
Got a message that your message failed fraud checks and an option to see blocked content. Thought you might like to know. On the jib halyard, take it to the bow before measuring it. Probably a know brainer. WaltFrom: AlbinVega@yahoogroups.com AlbinVega@yahoogroups.com on behalf of manningharvey@... [AlbinVega] AlbinVega@yahoogroups.com
Sent: Thursday, July 21, 2016 12:26 PM
To: AlbinVega@yahoogroups.com
Subject: [AlbinVega] Re: Halyards



Chuck and Laura Rose have written an entire page on their website cruisinglealea.com about replacing the running rigging on an Albin Vega. Chuck is the man to see on all things Vega. Another way is to attach a long tape measure to your existing halyard and
run it up to the top of your mast. Measure the distance from the mast step/deck to the top of the mast and multiply that number by two and add ten feet. That also works well. Good luck.
 
You must log in or register to reply here.

Top Bottom