H36 (Modern) Bow Roller.

[Don12364]

Am trying to assist a friend who owns a modern H36.
He requires a new bow roller, the original having been chewed up by the anchor chain.
He lives in England but his boat is in the Mediterranean.

He has asked Hunters to supply a new one but they are asking him what size it is and can they see a photo.
Answers - "Don't they know!" and "No", because boat is a 4 hour flight away.

Can anyone assist with roller length, diameter and bore size please.
Also a pic would help.
Thanks
Don.

 

[seadaddler]

Model

What model and year would be helpful.
Nick

 

[Don12364]

Like I said it is a Hunter 36 - approx year 2008.
i.e. Not the one listed on this site as H36_80-82

 

[seadaddler]

Try

Next time at the boat will take photo and measure it too,this weekend.
Nick

 

[Don12364]

Thanks Nick,
Don.

 

[amiller]

I have a 2004 H36 which should be the same anchor bow roller assembly. I purchased at West Marine, sku=9397217 which is a Lewmar 68000856 roller. They installed just fine, you have to take the SS tube wihich is inside of the old one out and put it into the new roller. We did this in October and have done maybe 50 anchorings since then with no problems. Just remember to fill the SS tube with something like SuperLube grease during re-assembly.

 

[Don12364]

Thanks amilller - looks just right. Thanks also for the tip re the inner sleeve as I would have rejected the WM because the bore was too large.
don.

 

[Lance Dias]

H356 Bow Roller

I have a 2004 H36 which should be the same anchor bow roller assembly. I purchased at West Marine, sku=9397217 which is a Lewmar 68000856 roller. They installed just fine, you have to take the SS tube wihich is inside of the old one out and put it into the new roller. We did this in October and have done maybe 50 anchorings since then with no problems. Just remember to fill the SS tube with something like SuperLube grease during re-assembly.

I am also looking for a new roller for my 356, can I use the same Wes Marine one?