H356 salon hull ports replacement

[sailmaster39]

My fixed hull ports located in the salon both port and starboard are so cloudy etc. you nolonger can see through them.
Time to replace both.anybody tackle this. Where to purchase them.Any advice is appreciated.
Thanks
Richard

 

[Steve Dion]

Have you tried to buff them out? There are several products on the market that work well for this purpose.

Meguires
Novus Plastic Polish
Mothers
Flitz
Griot

 

[Bob 04 H260]

Many sailboat owners have made and replaced fixed ports on their boats. Polishing would be the easiest solution if you can resolve the problem that way.

The Hunterowners site here sells the sealant used to install them.

I think it would be best to use lexan if possible rather than plexiglass for strength reasons.
Good luck, Bob

 

[Allan Frey]

If it is cloudy, not crazed, use Meguiar's headlight restoration kit. It has all the components you need to restore the plastic to clarity and comes with full instructions.
Allan

 

[sailmaster39]

Thanks for all the suggestions. Its cloudy/hazed,not crazed.
Richard