H26 Replacement Portlights - Where???

[Pat Adam]

I am looking to replace or refurbish the portlights in my 1994 H26. Specifically, the head location one which has a broken tab and will not close properly - thus leaking.Has any H26 owner done this recently? If so, where did you get your supplies and how did you identify the proper size.So far I've id'd mine as Gray by Pompanelle Brand. I've been to their site and can't seem to find anything listed in the approximate size that I have. This leads me to believe I've measured the wrong way. I took the overall outside frame dimensions (10' X 17 3/4") and the inside lens lip dimensions (7" X 15"). Nothing seems to be near those dimensions on their site. I intend on calling them tomorrow.Any info. you have on the subject would be greatly appreciated.Regards,-Pat PS: Sorry for the duplicate post, I messed up the 1st location.

 

[Pat Adam]

I found what I need!

I have called Pompanette and they helped me identify my portlights. They still produce them as a current item and parts are available so I don't have to replace the whole thing. For any of you looking to replace just the lens (due to broken tabs) or screen assemblies, they have both at what I thought was a reasonable cost. I've included the link for anyone who may need it.Happy sailing!-Pat

 

[Danny]

What model isin the H26

Can you give us any info on which model or models are used in the Hunter 26, Thanks for any info.

 

[pablo]

Port Replacement

I agree with Pat. I had to replace a lens in my starboard port. Pompanette not only helped me figure out which one was right but helped me when I had problems installing.Paul HS/V Linda Belle95 H26

 

[Pat Adam]

H26 portlight model #

The model # on the Gray section of the Pompanette site for my 1994 H26 is G715-AD18 if you have an all black/tinted model (you probably do). You can find that under Gray / online catalog / portlights - gray series rectangular. Also, at the bottom will be a link to parts which will have your screens and other related items like the lens (GP907-44). Let me know if any other questions...Happy sailing!-Pat

 

[Peeper]

Call Hunter

We called Hunter about replacing ours, they have them (or at least had them) in stock. They have, I was told, a slight degree of bend to them that Hunter molds themselves. I will get mine from Hunter, when I get on the project.