H26 26 Vinyl Table Trim

[Ben Mitchell]

I don't think I am the first person to have this problem. Over the years the sun and air have shrunk the Trim and I have a full 6 in gap in my table trim. I have just refinished the table and would like to find some new trim. The only place I could find was www.greatlakesskipper.com. Does anyone know where else I can find some? Black is preferred over the white because I went with a dark stain but at this point...... I would take anything

I have had no luck on the Hunter site

Thanks

 

[Fred]

Can't help with the colour but with a little heat from a heat gun the vinyl can be stretched to close a 6 inch gap without much difficulty. This has been discussed previously.

 

[Crazy Dave Condon]

Second on that but I do believe the forum store can help here. If not, I will make a couple of inquiries.

 

[rgranger]

McMaster has vinyl trim and other types of trim.... Lots to choose from.

http://www.mcmaster.com/#trim-molding/=10zqlf5

http://www.mcmaster.com/#vinyl-trim/=10zqm0q

http://www.mcmaster.com/#standard-plastic-trim/=10zqmcj

http://www.mcmaster.com/#neoprene-rubber-edge-trim/=10zqmoc

http://www.mcmaster.com/#rubber-edge-trim/=10zqmv3

 

[Ben Mitchell]

Thanks for all the great ideas. This was my first time posting in this type of forum and I was really stuck. I think I am going to do both (stretch) and purchase from McMaster. I'll let my wife decide which one is better

RGRanger, I have been searching on line for weeks and never found McMaster. They have multiple options for me. This goes to show how large the internet is!

Thanks for the help!

 

[rgranger]

de nada

I'm sure I learned of McMaster from this forum at some point in the past. Just closing the loop.

This forum has some great people and a wealth of knowledge.

 

[Crazy Dave Condon]

Thank you for advising Rob