I am trying to modify a used trailer to fit my H22 swing keel. Would someone please post several pictures of their H22 trailer to help me with my retrofit.
H22 Trailer Pictures
- Thread starter WindRose24502
- Start date
- Status
I am adding sailboat bunks to a power boat trailer. I am looking specificly for the height of the center uprights holding the bunks. I think the rear ones are approximatly 20" tall (5 feet apart) and the front approximatly 12" tall (24" apart). But I do not know the height of the center ones or the distance apart.. If you have the correct heights of the three bunk supports I would appreciate it.
Trailer bunk dimensions---??
Well mine is a swing keel... bunks are 2"x6"x12', 5' apart aft, 2'2" apart fwd, 18" off the trailer aft, 12" off the trailer fwd ... with accordingly hull shape in between, supported at 6 locations (3 aside), plus a keel roller fwd.
Still working on finding the pictures on disk ... our weather will clear in CT this weekend, affording the opportunity to snap some fresh ones, if needed.
Well mine is a swing keel... bunks are 2"x6"x12', 5' apart aft, 2'2" apart fwd, 18" off the trailer aft, 12" off the trailer fwd ... with accordingly hull shape in between, supported at 6 locations (3 aside), plus a keel roller fwd.
Still working on finding the pictures on disk ... our weather will clear in CT this weekend, affording the opportunity to snap some fresh ones, if needed.
trailer information
I thank you for the pictures provided. As they say a picture is worth a 1000 words and these will help me greatly. Could you measure the height of the three uprights and post them?
I thank you for the pictures provided. As they say a picture is worth a 1000 words and these will help me greatly. Could you measure the height of the three uprights and post them?
H-22 trailer
SeaTR
Thank your for the information and taking the time to help a fellow boater.
Wind Rose
SeaTR
Thank your for the information and taking the time to help a fellow boater.
Wind Rose
- Status