H22 Spinnaker rigging - any pictures

[Steven Gully]

I have ordered a spinnaker and have seen the rigging on some of the boats at our marina but not a Hunter 22. Was wondering if anyone had a picture of the bow and the rigging for their spinnaker or any suggestions before I try to figure this out on my own. The mast is rigged and ready. Where would suggest attaching the blocks? I am guessing near the winches.

 

[Brant]

I did it

I rigged mine two years ago, I put the blocks all the way in the stern on the toerail. the mast already had a place to run a second forward halyard. A pole topping lift was placed about 3-4 feet below the spreaders, and I put a ring on the mast about shoulder high on the mast. As far as a pole I made one using the j measurement for my length. Good luck let me know how it comes out.