H-356/36 impeller

[seadaddler]

Hi all does anyone have the # of the Johson impeller for the raw water pump or what do you use.
I got my last impeller down in Ft Myers Yanmar and want to do a search for impellers.
Nick

 

[Scott B]

I use the Yanmar 128990-42200 3YM30, best price I've seen up here is $ 30

 

[seadaddler]

Ditto

Yes I got the same ones down here from Yanmar in Ft Myers and think 2 were like maybe $41 or $44 for 2 I think,I have a Johson impeller for my Fisher Panda Gen and had a Johson impeller for my Yanmar and they really last a long time for sure.
I guess I should have saved the box,no big deal.
Are you sailing yet,the weather is terrible this week rain and low wind so far this whole week and may not go out cruising thursday to weekend if it does not get any better.
Nick

 

[Scott B]

Can you size it from the Johnson site.. http://www.johnson-pump.com/jpmarine/products/impellers/index.html

Nopt in yet, but the weather been great. Sunny and high 70's low 80's this weekend for the long weekend. I've had too much on the go this spring and don't have the boat ready to go in yet. Maybe in a week.

 

[HernandoBeacher]

I just checked my spares and the Yanmar Brand Impeller is labelled as X08810B and the Impeller O-ring is labelled X02173476

 

[Scott B]

I just checked my spares and the Yanmar Brand Impeller is labelled as X08810B and the Impeller O-ring is labelled X02173476

That's the old no. Replacement no is the one I listed above.

 

[356_Steve]

The pump is a Johnson F4B-903, which is a "Customer P/N" (Yanmar). The original Johnson P/N was 09-810B for the impeller. A quick search on the Johnson P/N yields a lot of alternatives, with a wide varity of prices, with some around $15.

I attached the Johnson manual for the raw water pumps. It has the full breakdown of all the P/Ns of everything in the pump. Just do a search on F4B-903.

 

[Ken Honeycutt]

You can get them here:
http://www.jamestowndistributors.co...familyName=Johnson+Pump+Replacement+Impellers