H-34 Halyards

[YVRguy]

Quick question for Hunter 34 owners. What is the ideal size line for the halyards? (assuming the same size for the main, jib and spinnaker). Ours are worn and in need of replacement but the current jib halyard seems bigger than the rest.

Also, does anyone have photos of the jib block at the top of the H34 mast? Thanks

 

[a65sailor]

I replaced all of mine with 11mm New England VPC 120 feet each.

 

[FastOlson]

As long as the size fits your sheaves and clutches, go with 5/16" T-900 (or equivalent).

LB

 

[Allan12210]

At the time I was looking, the deal at the store right here was quite good. The jib and main halyards were the exact length and they even spliced a new shackle on each. At least check it out.

 

[splax]

H34 rigging sizes

This is from someone's post for standing and running rigging and the tension preload.

 

[Steve Dion]

The HOW store has the correct sizing of your running rigging.

 

[YVRguy]

This is from someone's post for standing and running rigging and the tension preload.

Thanks. This confirms all halyards are 7/16