Good Cheap Gloves - in Sailing World last issue

Status
Not open for further replies.

oilcan

.
Nov 14, 2010
1
Cape Cod Merc 16' Cohasset
In the Gear section of the last issue of Sailing World, there was featured a sailing glove that came in boxes of, I think, 12 pairs, and were handy and relatively inexpensive. In a fit of madness/cleanliness, I tossed the magazine without writing down the info. Does anybody have the info - from the issue following Sept 2010?

Thanks in advance -- oilcan
 

RAD

.
Jun 3, 2004
2,330
Catalina 30 Bay Shore, N.Y.
Go to Home Depot and they sell gloves that look like sailing gloves and there cheap.....if you need the fingers cut off get some good scissors
 
Feb 6, 1998
11,709
Canadian Sailcraft 36T Casco Bay, ME
Go to Home Depot and they sell gloves that look like sailing gloves and there cheap.....if you need the fingers cut off get some good scissors
Ditto. My contractor gloves work as well or better than any of the "sailing" gloves I've owned. Best part I think they were $9.00 or so...
 
Sep 29, 2008
1,944
Catalina 310 #185 Quantico
Home Depot

Got some of those gloves - got 3 for $9.99. I do like my West Marine gloves better, but these were too good a deal to pass up.
 
Mar 25, 2010
64
Cal 29 Lake Saint Clair - SCS
I read that article. I can't remember the brand, though.

Have you tried checking out what your local $1 store has?
 

upei1

.
Nov 14, 2010
16
Oday Tempest Croton
They might be "Nitrile" gloves. Good puncture resistance. not waterproof though. I do contracting / piping work and they will not keep your hands dry. if they are HD will have them, any plumbing supply store. They are also good if you are allergic to latex gloves.
 
Jan 10, 2009
590
PDQ 32 Deale, MD

upei1

.
Nov 14, 2010
16
Oday Tempest Croton
I stand corrected! These gloves make much more sense for boating. (like i said, new to all this, and learning all the time).
 
Jan 10, 2009
590
PDQ 32 Deale, MD
I stand corrected! These gloves make much more sense for boating. (like i said, new to all this, and learning all the time).
Nitrile is better where oil is found; get these Atlas gloves anywhere near gasoline one time and you can throw them away.
 
Aug 2, 2005
374
pearson ariel grand rapids
I normally use 'mechanics' gloves, good feel and warm enough when needed. not 100% waterproof, but dry fast and don't seem to be as cold as some when they are wet.

They're light enough that you have good feel, and can work with them on, but I normally, (not always) cut the thumb and at least the index finger off them.

Fairly cheap, $8 to $10 a pair around here, and last a good year or two.
 
Status
Not open for further replies.