Recently when I go to put my boat into gear, there is a shuttering sound and it appears that the transmission is not engaging. After a while, it will go into gear. Is this a transmission problem or something else Could a cutlass bearing cause this.
...a couple of times. I think the RPMs were to high. I have since been sure I was at idle before shifting and have not experianced any of those symptoms. I hope this helps and that it is not a more costly fix. Dylan
Just went through this exact thing. Two nuts fell off the transmission coupler. Check to make sure all 5 are on, and tight. Yard failed to attach lock washers.
Mike I wanted to check my coupler bolts too (although they are strung together with wire currently, they still may have worked loose). How much did you crank them down? Is this a torque wrench deal? Thanks, Ron Vanderveer
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
