Glass on the front cabin bulkhead

Status
Not open for further replies.
Dec 24, 2010
78
Oday 22 Erie Basin Marina Buffalo, NY
Would it be safe to install an additional cabin window on the front bulkhead of an O'Day 22 cabin or would that affect the structural integrity of the cabin?
 
Jun 12, 2010
936
Oday 22 Orleans Marina, NOLA
You mean the bulkhead where the chainplates attach (well, that's the only bulkhead I guess). I've heard mine creak and groan when we have a good heal going on, so I'd use something that is thick (plexiglass?) and attach it in a way that would not pop out when the bulkhead is twisted.

EDIT: huh, re-reading your post I'm thinking you mean the front of the cabin, if so, never mind. I have no idea about how that would effect the strength of the cabin - seems like it would at least a bit, however.
 
Last edited:
Dec 24, 2010
78
Oday 22 Erie Basin Marina Buffalo, NY
Hi Ken,
Yes I was talking about the front of the cabin, and I'm thinking it may weakin the roof of the cabin somewhat, but I don't know if that is a serious issue. It would be nice to have a view of where you're going for anyone that is below while underway.
 
Aug 4, 2009
204
Oday 25 Olympia
We had a sloop with a narrow (9") window the full width of a low doghouse on the aft end of the cabin. It was worth its weight in gold! To avoid any possible structural effect on your boat, you might look into attaching a plastic dome to the main companion hatch cover. Our previous boat had a small port (6x16") in the front of the house which gave a great view of the foredeck and not much else. Also it was far forward and unhandy for single handing.

FWIW. Geohan
 
Dec 24, 2010
78
Oday 22 Erie Basin Marina Buffalo, NY
After reading the post in O'Day modifcations concerning the mast compression post, I think I will scrap this idea all together
 
Status
Not open for further replies.