BobM brought up an interesting situation on another thread. He indicated he lost headway. Most every sailor I know have been in this situation. It is how they get out of it that is interesting.
The term "irons" come from the early days of sailing ships. When they couldn't move they were said to be handcuffed and the other ship circled them for the kill.
Most beginners panic in this situation. I know I did especailly since I was drifting backwards toward a sea wall in Long Beach, Ca harbor. You need to get the boat moving backwards and you can do this by pushing the boom out until it fills. This is called "backing the mainsail". Once you start to drift/sail backwards you are half way out of the problem and the first thing you need to do is start steering backwards. At this point you've got the boom over say the starboard side of the boat and your rudder is centered. The next thing you want to do is move the tiller over to the same side the boom is on - remember you're steering backwards. The bow will move to starboard and then trim the mainsheet and off you go.
It is much easier to get out of irons by using the jib. Simply "back the jib" by holding it to the side until the boat starts to sail backwards. The bow is going to be pushed to the opposite side. Once the boat get onto a reach attitude just trim the main and jib and off you go.
Like anything this may seem complicated until you try it a couple of times. Once you try it you'll see how easy it is. Obviously, try it in open water and don't wait until you get into the situation to learn how to do it.
The term "irons" come from the early days of sailing ships. When they couldn't move they were said to be handcuffed and the other ship circled them for the kill.
Most beginners panic in this situation. I know I did especailly since I was drifting backwards toward a sea wall in Long Beach, Ca harbor. You need to get the boat moving backwards and you can do this by pushing the boom out until it fills. This is called "backing the mainsail". Once you start to drift/sail backwards you are half way out of the problem and the first thing you need to do is start steering backwards. At this point you've got the boom over say the starboard side of the boat and your rudder is centered. The next thing you want to do is move the tiller over to the same side the boom is on - remember you're steering backwards. The bow will move to starboard and then trim the mainsheet and off you go.
It is much easier to get out of irons by using the jib. Simply "back the jib" by holding it to the side until the boat starts to sail backwards. The bow is going to be pushed to the opposite side. Once the boat get onto a reach attitude just trim the main and jib and off you go.
Like anything this may seem complicated until you try it a couple of times. Once you try it you'll see how easy it is. Obviously, try it in open water and don't wait until you get into the situation to learn how to do it.