Genoa measurement for Catalina 30 tall rig

[Ken13531]

I just purchased a Catalina 30 MkII with Tall Rig and a Bow sprit.This is my first boat.I am confused by all the sail measurements I see.Catalina shows the following for a tall rigI= 43'E = 12'P= 37'6"J= 13'1 7/8" The Genoa is in rough shape and I need to replace it.There are lots of places selling used sails but they talk in Luff and leech measurements. I have tried to figure out what they would be but get more confused the more I research. Can someone make this easy for me?The boat has Roller furling.ThanksKen

 

[Richard4728]

Sail measurements

Try these links and measure the Luff, Leech, Foot and LP of the sail you want to replace. Use those measurements when searching for a new sail. http://www.cruisingdirect.com/LP_Measure.htmhttp://www.catalina30.com/Organization/specifications.htm

 

[JOHN]

USED 135 ROLLER FURLING GENNY

I have a used (not sure how old it is) 135 genny for my Cat 30 tall rig with roller furling. It was a 150 but had ripped in a storm. It is workable now since a sailmaker has repaired it. It does not have a UV cover on the luff but it is serviceable. It has been reinforced in key areas. Not sure haw much life is left in it. I would sell it to someone that needs one for a low reasonable price. Located on Lake Erie. If you have an intrest, give me a reply.

 

[Ken13531]

I need a Genoa sail

Thanks John for the reply. I am interested in your Genoa. My boat is still out on the west coast, I hope to get it here before much snow flies. It has a bow sprit as well as the tall mast. Can you call me at 780 455 2151 or Email at kinny@planet.eon.net.ThanksKen Lane