Sail pull on mast not simply forward......
This is an interesting topic which returns every few months or so. The original poster is likely to learn far more by simply searching the archives. However, freshly served half-truths may appear more tantalizing to newcomers than stale truths. Therefore, it behoves all of us to keep responding as best as we can. In the current thread I find myself in full agreement with David. Peter simplifies things a little too far by writing: "Think about it. No matter what sails you have set or what angle of attack, the resultant force is forward. The jib is pulling the mast forward and the main is pushing it"The fact is that on all points of sail but a dead downwind run the direction of the sail-transmitted wind forces on the mast has a marked sideways component as well. In fact, when close-hauled the resultant force on the mast is much more sideways than forward, causing a vessel without keel, centerboard or leeboard to scud off sideways and make little or no headway.It is the interplay between the sail-transmitted forces (not only on the mast but also on the sheet attachment points) and the strong resistance of underwater appendages such as keel and/or boards (and, in fact, the u/w section of the hull itself) to sideways movement that produces a net resultant force with a dominant forward component.This is why the use of running backstays (which pull the mast aft as well as sideways) has traditionally been the preferred method of reinforcing the mast in strong winds, especially in case an inner forestay pulls on the mast without directly opposing pull from shrouds or mainsail.On Rivendel II we ALWAYS set the specially installed running backstays when making a longer passage in strong winds, particularly when flying our inner headstay mounted staysail. When flying both jibs wing-on-wing on a nearly dead downwind run we use both running backstays.Flying Dutchman"Rivendel II" (Legend 43; currently dry-berthed in Port Vila for the cyclone season)