- Jul 24, 2006
- 628
Hi all, had a good day on the boat today. I can't hardly wait to come home and see what you all have to say. I scouped out the bilge-literally, with my long handled kitchen spoons. Stopped at walmart and bought two more bottles of bleech, and two canisters of comet-cheap. Got to the boat, openned up everything, sprinkled comet onto the hull inside-figured that it wopuild be scrubbed by my walking about. Then set to work scooping the bilge crud. Got at least a gallon of crud. And this is after three days of scooping and flushing. After dealing with the stench i decided to get some fresh air. The boat was sitting on the bottom and the barnickles where showing good. Went all around the boat as far as my arms would reach. Went pretty good. Had to be careful though, I read where some diver sank a boat bu scraping a thu hull. Cut the shit out of may hands, so no more bilge work-disease! Then came back in the cabin and stARTed work on the temp floor. The inside didn't smell like a sewer anymore, but kindoff industrial. Put down temp floor-was getting tired of walking around on the floor supports-like walking on trusses. Floor down, ben down bellow for a while, so I decided to check the mainsail. Unlashed it, untangeled haliards, and low and behold, raised the main!!!!!!!!!!!!!!!!!! Gotta love it, a free boat with a useable main. Has had quite a few patches, but i half expected it to fall into pieces when i hoisted it. WIre rope haliard is new to me. Do you rap the wire around a winch like rope? I have a pic with the main up but have'nt brought the camera in from the truck yet. All thats left is to put on a aux bracket and hang the motor and i'm off. the po came by tonight-will add in next reply. Patrick