I have a 2002 306 and had a leak (still looking for it) in the stern cabin berth. I want to replace the vinyl hull liner on the port side. Does anyone know where I can find matching vinyl?
Foam Backed Vinyl Hull Liner
- Thread starter raysco
- Start date
- Status
Ray:
The first thing I would suggest is to contact Hunter Marine. They may have this type of material in stock or know where you can get some matching material. They are very helpful in this area.
If you do not need to match anything, Sailrite sells several products that you may be interested in.
http://www.sailrite.com/
The first thing I would suggest is to contact Hunter Marine. They may have this type of material in stock or know where you can get some matching material. They are very helpful in this area.
If you do not need to match anything, Sailrite sells several products that you may be interested in.
http://www.sailrite.com/
Rub Rail
Try checking the rub rail where the top and bottom halfs are bolted together,I had a leak at the rear stern ladder section and when motoring it would dig into the water line more and leak,I had to remove the rear cabin bulk head to find and also had a leak on the port or starboard side of the hull.
Nick
Try checking the rub rail where the top and bottom halfs are bolted together,I had a leak at the rear stern ladder section and when motoring it would dig into the water line more and leak,I had to remove the rear cabin bulk head to find and also had a leak on the port or starboard side of the hull.
Nick
Re: Rub Rail
Seadaddler,
funny thing, we had a leak around the same place, where the deck and hull were joined, glued with 5200 and bolted, port stern area. after we went through countless hours of trying to figure out where the water was getting in we finally figured it out. We contacted hunter about the repair but they said it was not a hull warranty issue but rather a seal issue which isn't covered under warranty. Total BS...
Just wondering if you fixed this yourself or did hunter cover it?
J&R
Seadaddler,
funny thing, we had a leak around the same place, where the deck and hull were joined, glued with 5200 and bolted, port stern area. after we went through countless hours of trying to figure out where the water was getting in we finally figured it out. We contacted hunter about the repair but they said it was not a hull warranty issue but rather a seal issue which isn't covered under warranty. Total BS...
Just wondering if you fixed this yourself or did hunter cover it?
J&R
- Status