I've read the postings in the archives for redoing teak but most of them are for interior wood. Is exterior wood done the same way? I'm trying to redo my stern rail seats. They are exposed all the time to the weather.The previous owner had them looking real nice when we bought the boat. This is the first time I've done this. Don't have a lot of experience in refinishing wood. Could use lots of input. Thanks Paul H S/V Linda belle
- Status
- Not open for further replies.
J
John Scharer
Use Sikkens
Paul, the best way to do this is to: 1. Take of the stern rail seats 3 or 4 screws 2. Take off the wood slats. 3. Clean slats with teak cleaner to wood. 4. Lighly sand wood. 5. Apply 3 coats of Sikkens teak sealer. 6. Attach slats to seats and reinstall seats to stern rail. 7. Clean with soap and water and reapply a maintenance coat of Sikkens every six months or annually depending on your exposure. 8. If there are any spots that are scratched or the wood is exposed/blistered you will need to lightly sand before doing a maintenance coat. 9. Look at your beautiful teak seats. John Scharer S/V Zinfandel H260
Paul, the best way to do this is to: 1. Take of the stern rail seats 3 or 4 screws 2. Take off the wood slats. 3. Clean slats with teak cleaner to wood. 4. Lighly sand wood. 5. Apply 3 coats of Sikkens teak sealer. 6. Attach slats to seats and reinstall seats to stern rail. 7. Clean with soap and water and reapply a maintenance coat of Sikkens every six months or annually depending on your exposure. 8. If there are any spots that are scratched or the wood is exposed/blistered you will need to lightly sand before doing a maintenance coat. 9. Look at your beautiful teak seats. John Scharer S/V Zinfandel H260
T
Tim Paul
Cetol Gloss
I redid mine last year with Cetol and Cetol Gloss finish. After one season the finish has held up and still looks new. The seats get a lot of use from my kids and sit unprotected in a marina slip all summer. I think the Cetol gloss has UV protection in it and it seems to work.
I redid mine last year with Cetol and Cetol Gloss finish. After one season the finish has held up and still looks new. The seats get a lot of use from my kids and sit unprotected in a marina slip all summer. I think the Cetol gloss has UV protection in it and it seems to work.
J
Jeff
Covers Keep It Simple
Paul, During the off season I remove my exterior teak including the stern rail seats and take them home. The slats come off the seats easily. I have used a Starbrite 3 step product. First the cleaner then the brightner and finally the teak oil. Several coats of oil. This lasts for about two seasons but only because ALL our teak is covered when we're not using the boat. If it's not covered the gray color returns within the first season. The upside is that this process only takes me a couple of hours every two years. More time for other winter projects. Jeff S/V "Festivity" H26 1996
Paul, During the off season I remove my exterior teak including the stern rail seats and take them home. The slats come off the seats easily. I have used a Starbrite 3 step product. First the cleaner then the brightner and finally the teak oil. Several coats of oil. This lasts for about two seasons but only because ALL our teak is covered when we're not using the boat. If it's not covered the gray color returns within the first season. The upside is that this process only takes me a couple of hours every two years. More time for other winter projects. Jeff S/V "Festivity" H26 1996
H
hp
A better finish
I agree with John's procedure but beg to differ on the finish. Good old-fashioned spar varnish will provide an exquisite finish and last longer. I too recommend covering the seats with the same fabric used on the pedastal and boom. Since this is about the only teak left on the boat (thank goodness), a little extra care goes a long way toward an impressive appearance.
I agree with John's procedure but beg to differ on the finish. Good old-fashioned spar varnish will provide an exquisite finish and last longer. I too recommend covering the seats with the same fabric used on the pedastal and boom. Since this is about the only teak left on the boat (thank goodness), a little extra care goes a long way toward an impressive appearance.
R
Robbie Reeves
Marine Teak Oil
Paul H - I did the same as John Scharer and removed the varnish that the previous owner had painted over the beautiful teak timber which had made them dark in color. Applied a Marine Teak Oil and everyone that comes aboard makes a comment on how good they look. The finish has lasted 2 months so far, but will need oiling every three months here in Australia with our high UV's. But that's easy, anyway, with a clean rag and only a couple of minutes work at the end of your sailing day. Robb
Paul H - I did the same as John Scharer and removed the varnish that the previous owner had painted over the beautiful teak timber which had made them dark in color. Applied a Marine Teak Oil and everyone that comes aboard makes a comment on how good they look. The finish has lasted 2 months so far, but will need oiling every three months here in Australia with our high UV's. But that's easy, anyway, with a clean rag and only a couple of minutes work at the end of your sailing day. Robb
D
David Undewood
also, use semi before using gloss
Cetol has the high gloss and I think semi gloss but can't remember what that call it exactly, but I do know you get better results if the semi gloss is used as base coat(s) 2-3, then apply high gloss as final finish coat. Some never use the high gloss at all. Then, if covers are used, prob. last a lifetime.
Cetol has the high gloss and I think semi gloss but can't remember what that call it exactly, but I do know you get better results if the semi gloss is used as base coat(s) 2-3, then apply high gloss as final finish coat. Some never use the high gloss at all. Then, if covers are used, prob. last a lifetime.
K
Kevin Uckert
Stern Rail Seat Covers
Has anyone located stern rail seat covers? I don't need or want the cushions, just something to protect the teak seats from UV rays. If not I'll just make them.
Has anyone located stern rail seat covers? I don't need or want the cushions, just something to protect the teak seats from UV rays. If not I'll just make them.
B
Bill and Nancy
STERN RAIL SEAT COVERS
Hunter Owners (our host) wil make a set for you. I have made a pattern that I have not sent in yet but a pair will run around $60.00 if I remember correctly. We have a problem keeping teak oil on the seats, even though we do it every time we are on the boat. It just dries out so fast. I plan to sand and finish with either cetol or marine varnish and keep covered when we are not on board. Hopefully the finish will last a couple of years this way. Ay Chihuahua, H260 Albuquerque, NM
Hunter Owners (our host) wil make a set for you. I have made a pattern that I have not sent in yet but a pair will run around $60.00 if I remember correctly. We have a problem keeping teak oil on the seats, even though we do it every time we are on the boat. It just dries out so fast. I plan to sand and finish with either cetol or marine varnish and keep covered when we are not on board. Hopefully the finish will last a couple of years this way. Ay Chihuahua, H260 Albuquerque, NM
D
Dave Oberholtzer
Cetol
I also refinished my seats and companion way with cetol and they look great after one season. Cetol gives the teak a darker oranger color but I like it alot. It isn't cheap but it works great. Dave Oberholtzer Hydrotherapy
I also refinished my seats and companion way with cetol and they look great after one season. Cetol gives the teak a darker oranger color but I like it alot. It isn't cheap but it works great. Dave Oberholtzer Hydrotherapy
Cetol and covers.
Paul: The key to getting a good job is good prep and follow instructions. Cetol or Armada are both good products. I have NOT used Armada. With the Cetol you have choice of the regular or the Lite and they also have a clear coat. Cetol is suppose to be applied every 24 hours (one coat per day). I have found that a nice light clean up with bronze wool or sanding between coats give a very nice finish. Three (3) coats are minimum and if you are using the clear finish I would suggest two coats of the clear. Order a set of covers before you start so they are ready to put on once the seat are reinstalled. They will last several years if you keep them covered when you are not using them. I believe that you can also have cushions made for them too. Do this and y'all will be happy!
Paul: The key to getting a good job is good prep and follow instructions. Cetol or Armada are both good products. I have NOT used Armada. With the Cetol you have choice of the regular or the Lite and they also have a clear coat. Cetol is suppose to be applied every 24 hours (one coat per day). I have found that a nice light clean up with bronze wool or sanding between coats give a very nice finish. Three (3) coats are minimum and if you are using the clear finish I would suggest two coats of the clear. Order a set of covers before you start so they are ready to put on once the seat are reinstalled. They will last several years if you keep them covered when you are not using them. I believe that you can also have cushions made for them too. Do this and y'all will be happy!
- Status
- Not open for further replies.