time flies and if I don's send out these samples now I will be lucky to get any feedback. I intend to do this within the week. You will get 4 Oz of a resin emulsion (shake and spray on) also a small sample of new version of superwax which is much less slippery than regular wax and may also be suitable for topsides, if not non-skid itself. My deadline is this Weekend. I already have some people lined up from early in the year. Thanks Jim WIllis
- Status
- Not open for further replies.
J
JOHN DROST JR.
I would like to give it a try
The boat is home and getting cleaned up, This is a good time to try somthing other than car wax, thanks John Drost Jr. rr3 b0x 151-a Meshoppen Pa 18630
The boat is home and getting cleaned up, This is a good time to try somthing other than car wax, thanks John Drost Jr. rr3 b0x 151-a Meshoppen Pa 18630
T
Tom Ehmke
beta testing
I would like to participate if the opportunity is still available. The boat is snugged into its cradle for the long winter night and before bedtime, I'd like to wax her hull just one more time... Tom Ehmke 6506 Alexander Rd. Pemberville, Ohio 43450 Thanks
I would like to participate if the opportunity is still available. The boat is snugged into its cradle for the long winter night and before bedtime, I'd like to wax her hull just one more time... Tom Ehmke 6506 Alexander Rd. Pemberville, Ohio 43450 Thanks
J
John Pierce
Me Too
We sail year round in saltwater and blazing sun so if you want to know how it holds up I'll let you know. Please send to J Pierce 4781-S.-Atlantic Ave. D4 Ponce Inlet Fl. 32127
We sail year round in saltwater and blazing sun so if you want to know how it holds up I'll let you know. Please send to J Pierce 4781-S.-Atlantic Ave. D4 Ponce Inlet Fl. 32127
L
Larry McKay
D
David
Non Skid Sealant
Jim, My Hunter is 12 years old now. Living on the Gulf Coast, the deck really takes a beating year round. I have tried Future floor sealant on limited test areas; however, I am not pleased with the results. Please include me in your Beta test for the new IG sealant. Thanks David Priestly 142 Woodruff Drive Slidell, LA 70461
Jim, My Hunter is 12 years old now. Living on the Gulf Coast, the deck really takes a beating year round. I have tried Future floor sealant on limited test areas; however, I am not pleased with the results. Please include me in your Beta test for the new IG sealant. Thanks David Priestly 142 Woodruff Drive Slidell, LA 70461
S
Sloopercat
R
Roger Noble
count me in, please
You should have my address, but if not, please e-mail me at rogern@inetport.com and I'll send it off-list. Thanks, Roger Noble Austin, Texas
You should have my address, but if not, please e-mail me at rogern@inetport.com and I'll send it off-list. Thanks, Roger Noble Austin, Texas
S
Steve Gautney
Send some my way . . .
Over the years I've enjoyed beta testing several great products for manufacturers. Address is 1408 Scenic Drive Talladega Al 35160 or email at gautney@ibm.net. Thanks
Over the years I've enjoyed beta testing several great products for manufacturers. Address is 1408 Scenic Drive Talladega Al 35160 or email at gautney@ibm.net. Thanks
F
Fred Radcliffe
Will givi it a shot
Non-skid on my Hunter is worn. Be glad to try it for you in the deep south. 1763 Cartina way Venice Fl 34292
Non-skid on my Hunter is worn. Be glad to try it for you in the deep south. 1763 Cartina way Venice Fl 34292
J
Jim Cook
A little confused
Jim I am a little confused about some responses to your request. Is this a sealant for the non-skid surface, or will it help repair a worn surface. My surface is worn in spots. I am considering trying to replace/repair it this winter. In either case, I am interested in your product and would be happy to test it in the South Texas area. Also, please send information about your other products. Thank You, Jim Cook
Jim I am a little confused about some responses to your request. Is this a sealant for the non-skid surface, or will it help repair a worn surface. My surface is worn in spots. I am considering trying to replace/repair it this winter. In either case, I am interested in your product and would be happy to test it in the South Texas area. Also, please send information about your other products. Thank You, Jim Cook
H
Hayden Watson
I'll Try it
I volunteered way back when you first started talking about your new product but I haven’t heard back from you. I started the thread about using Future floor finish which got this whole discussion going. As I mentioned in my earlier post I left the Future off a section of my deck to do a comparison. Thanks again for all of your great products. Hayden Watson 1305 N. Corrigan Rd. Spokane WA 99027
I volunteered way back when you first started talking about your new product but I haven’t heard back from you. I started the thread about using Future floor finish which got this whole discussion going. As I mentioned in my earlier post I left the Future off a section of my deck to do a comparison. Thanks again for all of your great products. Hayden Watson 1305 N. Corrigan Rd. Spokane WA 99027
A
Aaron
I' would love to try it
Jim, I am in the process of restoring my '71 Cat 22 and I would love to try out your wax and resin. 3700 Plainsman Ln Bryan, TX 77802
Jim, I am in the process of restoring my '71 Cat 22 and I would love to try out your wax and resin. 3700 Plainsman Ln Bryan, TX 77802
A
A.L. ("Jim") Willis Pres of ISLAND GIRL PROD.
Its a sealant that does not reduce grip
In reply to "confused" this is not a non-skid repair or replacement. I got the idea from all the talk about sealing the non-skid to prevent staining )without making slippery as with regular wax). People suggested future floor treatment (an acrylic). The It would be ice if the sealant also increased grip but it also has to be durable and able to be removed. Several people volunteered earlier in the year (I still have their responses). I know need more people and obviously mailing addresses etc and (ideally e-mial/phone as well) so that I can follow up. THanks JIm W
In reply to "confused" this is not a non-skid repair or replacement. I got the idea from all the talk about sealing the non-skid to prevent staining )without making slippery as with regular wax). People suggested future floor treatment (an acrylic). The It would be ice if the sealant also increased grip but it also has to be durable and able to be removed. Several people volunteered earlier in the year (I still have their responses). I know need more people and obviously mailing addresses etc and (ideally e-mial/phone as well) so that I can follow up. THanks JIm W
e-mail/phone
Jim: My e-mail is steve@sdcsoftware.com phone is 775/883-9339. I'm on PST. in Nevada.
Jim: My e-mail is steve@sdcsoftware.com phone is 775/883-9339. I'm on PST. in Nevada.
M
Monty Miller
Ditto...........
WE'll give your stuff the real test in hot central Texas. Thanks, Monty Miller 5115 Saddleridge Cove Austin, TX 78759 monty.miller@sematech.org
WE'll give your stuff the real test in hot central Texas. Thanks, Monty Miller 5115 Saddleridge Cove Austin, TX 78759 monty.miller@sematech.org
B
Bob McDowell
Count me in!
Bob McDowell 2011 Golf Course Dr. Reston Va 20191 mcdowell_bob@bah.com Love your products.
Bob McDowell 2011 Golf Course Dr. Reston Va 20191 mcdowell_bob@bah.com Love your products.
T
ToyBox
Like to help
I would like to help, but the sailing season is running short here in Md. Let me know and I will forward more contact information. Chris D chrisd20two@aol.com
I would like to help, but the sailing season is running short here in Md. Let me know and I will forward more contact information. Chris D chrisd20two@aol.com
T
Ted Warnock
Would Like to Try
Just getting ready to deal with the non-skid on my recently acquired '81 Hunter 30... would love to give your new product a try there... just bought a bunch of your IG products to use on the non-nonskid areas too... shipping address is 8288 Armetale Lane, Fairfax Station VA 22039! Look forward to it.
Just getting ready to deal with the non-skid on my recently acquired '81 Hunter 30... would love to give your new product a try there... just bought a bunch of your IG products to use on the non-nonskid areas too... shipping address is 8288 Armetale Lane, Fairfax Station VA 22039! Look forward to it.
R
Rich Lemieux
Non Skid Sealant
Yes, I would like to try it. I used your products this year for the 1st time and have been very impressed Rich Lemieux 64 Keirstead Circle Marlborough, CT. 06447 Thanks Rich richlem@aol.com
Yes, I would like to try it. I used your products this year for the 1st time and have been very impressed Rich Lemieux 64 Keirstead Circle Marlborough, CT. 06447 Thanks Rich richlem@aol.com
- Status
- Not open for further replies.