Fairing the Keel and Rudder

Status
Not open for further replies.
R

Ron Barrow

Does anyone have knowledge of how to obtain templets for fairing the keel and rudder of 1989 H 33.5?
 
M

MIke B

fairing,

stop in the sailing forum, ask for griff, He will email, u , it starts nitely at 10:00pm on aol,
 
M

Mark Dixon - UK sailmakers

foil fairing

You can try contacting Compute rKeels in Edina. MN. They have a lot of keel templates in their data base. Mark
 
P

PJ

Talk to Computer Keels

in MN. You may have to take a few measurements 1st. They will tell you where to take the measurements. They can then give you a range of thickness & degrees of lift on the templates. It is a big job to tackle, & you probably will need to epoxy seal the entire bottom of the boat along with the keel before you put on the VC17. My suggestion on the templates is to go for the wider stearing grove. Talk to West System re the epoxy application. It has made a big difference on my H34. BOL PJ
 
Status
Not open for further replies.