Exhaust Manifold

Status
Not open for further replies.
R

Richard Brahs

Has anyone changed the exhaust manifold, on a 1983 Yanmar 2GMF? Does it screw off, because I can see threads at one end? Any suggestions would be appreciated. Thanks, Richard
 
Dec 2, 1999
15,184
Hunter Vision-36 Rio Vista, CA.
Check to Photo Fourm

Richard: I posted an article in the photo forum. Check it out and you will see the parts and an explaination. Let me know if you have any questions.
 
J

John K Kudera

Exhaust

Hi, I think that your elbow is the same as mine on a 3GM, there are 4 bolts that fasten the exhaust to the manifold.Not too hard to remove them. I suggest removing the hose first, because if the hose has not been off recently, it will be difficult to remove. I usually remove the hose at the muffler end, then the 4 bolts and wrestle with the elbow off the boat. Good Luck!
 
Status
Not open for further replies.