ESTRELLITA:

Apr 2, 2013
283
Hi All, Does anyone have a contact address for the owner of this boat Estrellita? He used a non-slip on his decks that looks like an after market matting. I would like to find this product as to use it myself. Please advise. His boat is looking very nice. Larry V-2761 Sent from Windows Mail
 
May 30, 2006
1,075
How does one remove these for cleaning and refinishing?

























Hi
All, Does
anyone have a contact address for the owner of this boat
Estrellita? He used a non-slip on his decks that looks like
an after market matting. I would like to find this
product as to use it myself. Please advise. His boat is
looking very nice. Larry
V-2761 Sent from Windows
Mail
 
Sep 13, 2002
203
Lift up and pull out at the bottom - the slot at the top is deeper than the lower one.

Alisdair
 
Feb 13, 2010
528
If your boat has mahogany instead of teak I would just varnish it.
There is so little wood on the boat that it is only about a day a
year for you to maintain it assuming you do it often enough that
the varnish does not crack and peel. The mahogany on the boat is
far more handsome than teak in my opinion. The mahogany not being as
oily as teak holds varnish much longer with deep rich color.
Anyway thats what I think. OF course I am nearly 80 years old and
when I was young only mahogany was used for trim. WE did use teak
deaks but teak was mostly crate wood in those days. When You got a
shipment of china the crates were made of teak. Inch and a half
thick teak decks were the cats meow and cheap as dirt. All you did
was scrub them with a holy stone a couple times a year. Doug


On 10/23/2013 02:38 PM, groundhog
wrote:
 
Feb 13, 2010
528
Dawg Gone, Ground Hog, my last post sounded kind of snarky or sharp
or something and I didn't mean it that way. Sorry, Doug



On 10/23/2013 02:38 PM, groundhog
wrote:
 
Oct 30, 2019
1,459
Hmmm ... that sounds good, but isn't the door also wider than the opening?The galley cabinets on either side are glued and fastened with brads, rather than being bolted in like the rest of the woodwork. I ended up removing both cabinets and taking them into the shop for refinishing. I had to do a bit of destructive dismantling to get the doors out, namely prying off the upper rail on the inside of the cabinet. Carefully done you can avoid splintering it, or make a new rail to replace the old one.Peterwww.sintacha.com
 
Apr 2, 2013
283
Hi There, Is ESTRELLITA your boat?Larry Sent from Windows Mail From: Douglas PollardSent: ?Wednesday?, ?October? ?23?, ?2013 ?5?:?41? ?PMTo: AlbinVega@yahoogroups.com






Dawg Gone, Ground Hog, my last post sounded kind of snarky or sharp
or something and I didn't mean it that way. Sorry, Doug



On 10/23/2013 02:38 PM, groundhog
wrote:
 
Sep 13, 2002
203
I've an early Vega; there's a double-slotted hardwoord rail top and bottom. Two thin plywood sliding doors each more than 50% width so that they overlap.Removing the outer door makes space to remove the inner.I find the starboard doors are sometimes tricky to get out if they've swollen with damp (I keep meaning to replace them with plastic; it's been an item on my to-do list for 20+ years).Of course, you may have a completely different design, whether different model or previous owner's adaptation.AlisdairV752
 
May 30, 2006
1,075
Doug,
Just let her rip in my opinion. I love your posts.
When I see your name on the email list in my inbox I get excited as
I know I will learn something interesting.
groundhog