Epoxy for plywood

[Cederholm]

I need to bond some plywood to plywood in the interior. Any epoxy recommendations?

Thank you.

 

[dlochner]

Thickened epoxy will work. West System, TotalBoat.

Coat the plywood with neat expoxy and then spread the thickened epoxy.

Check the manual on the West System site or Total Boat site.

 

[Cederholm]

Thickened epoxy will work. West System, TotalBoat.

Coat the plywood with neat expoxy and then spread the thickened epoxy.

Check the manual on the West System site or Total Boat site.

Exactly what I was asking - thank you!!

 

[Hollyberry]

If you are going to end up with any exposed epoxy areas that you wish to paint I'd recommend Silvertip Epoxy, it's amine free and can be painted directly, without having to scrub off the amine blush that most other epoxies develop during a cure.

SilverTip Epoxy Resin

SilverTip Epoxy is a medium-low viscosity, liquid epoxy resin system optimized for coating and reinforcing fabric saturation in wood-composite boat building.

www.systemthree.com