The insulation around the inside the engine box has fallen apart. So, I'll replace it. Can anyone provide guidelines and what they used to do the same? I have some good advice from an article in PS.
- Status
Me too!
I also bought the insulation material from west marine. Cut to fit. Use a spray on adhesive to keep it in place while you tack it down. Job took about 1 hour. Getting the old stuff out was harder. I used a shop vac and a putty knife. Good luck. Dan S/V Illusions
I also bought the insulation material from west marine. Cut to fit. Use a spray on adhesive to keep it in place while you tack it down. Job took about 1 hour. Getting the old stuff out was harder. I used a shop vac and a putty knife. Good luck. Dan S/V Illusions
- Status