My 2004 Hunter 240 has a 3 prong electrical fitting though the deck at the foot of the mast to serve the anchor/steaming light at the top of the mast. The top/male half of the fitting was damaged. I can't find a manufacturer's name on the fitting. The only mark is "3A3P"; which probably refers to the 3 amp 3 prong plug. I can't find a match or even another 3 prong plug currently manufactured. Anyone know a source of a replacement plug?
electrical through deck fitting
- Thread starter Greg Northcutt
- Start date
- Status
Sometimes it is easier to replace the whole fitting with what may be readily available than to try to find a replacement part from an unknown manufacturer.
I believe what you want is similar to this one.
http://www.boaterbits.ca/electrical...oof-electrical-deck-connector-plug-3-pin.html
They are a Canadian company. Don't know if the ship to the US, but if they don't they should be able to give the name of the manufacturer.
Looks like seadog is the manufacturer.
http://www.sea-dog.com/groups/1992-polarized-electrical-connector
http://www.boaterbits.ca/electrical...oof-electrical-deck-connector-plug-3-pin.html
They are a Canadian company. Don't know if the ship to the US, but if they don't they should be able to give the name of the manufacturer.
Looks like seadog is the manufacturer.
http://www.sea-dog.com/groups/1992-polarized-electrical-connector
I am almost certain that the items that twalker refers to above are all available at West Marine, Defender, & others.
- Status