To those with a 1990 Hunter 33.5 (perhaps 1989 - 1991), can anyone tell me how to drop down the electric distribution panel above the Nav Station. I have looked at it and nothing is obvious. I have removed screws from the quater-round strip on the left and two screws on the top right side panel and nothing budges. On the right edge vertical trim strip there are (approx.) 3 teak bungs that are sanded flush and satin varnished over. Are these covering screws that remove that trim strip allowing accress? Any help would be appreciated. I need to access the rear of my 'dead' Eng-Hr Meter now and perhaps VHF later for upgrade.