A search revealed a good deal of info and advice regarding bottom paint for the Hunter 170, but I did not see any advice for painting the cockpit.
After removing some delaminating fiberglass that a previous owner had applied, I needed to apply paint to the cockpit (floor, seats, gunwales, etc.). I found the Rustoleum Painter's Touch 2X paint and primer (flat, spray) is a really good match for the existing color, but is bad about catching dirt and scuffs. Rustoleum makes the same product in gloss (which I have used on the hull with good results), but I worry that it might prove slippery when wet.
Any recommendations for a paint for the deck areas? Both regular and non-skid.
Thanks!
After removing some delaminating fiberglass that a previous owner had applied, I needed to apply paint to the cockpit (floor, seats, gunwales, etc.). I found the Rustoleum Painter's Touch 2X paint and primer (flat, spray) is a really good match for the existing color, but is bad about catching dirt and scuffs. Rustoleum makes the same product in gloss (which I have used on the hull with good results), but I worry that it might prove slippery when wet.
Any recommendations for a paint for the deck areas? Both regular and non-skid.
Thanks!
Last edited: