Can anybody point me in the right direction to where I can buy some of the white poly board material so I can make a cutting board sinkcover for my H376?? Thanks. Bob
- Status
Bob, WM stocks two types of starboard...
aka marine lumber. One is pure white the other is off white...egg shell. A bit pricey, but easy to work with using standard wood working tools. It comes in one half inch and three quarter inch thick material of varying lengths and widths. Terry
aka marine lumber. One is pure white the other is off white...egg shell. A bit pricey, but easy to work with using standard wood working tools. It comes in one half inch and three quarter inch thick material of varying lengths and widths. Terry
Cutting Board
Try your local restaurant supply house. They sell large cutting boards to restaurants that are about 1/2 the price of "Starboard"
Try your local restaurant supply house. They sell large cutting boards to restaurants that are about 1/2 the price of "Starboard"
... as luck would have it!
As luck would have it, I found www.thecuttingboardfactory.com today. I bought at 1979 Grady White Overnighter in the spring and am in the process of making it mine. The anchor locker lid rotted away years ago. I found "Joe" at the factory today. He recommended a 3/4" piece (27x24) to cover the locker and said I could cut it, drill it, etc. Price was reasonable. Go to their website and give them a try. They have all kinds of stuff. Mention my name and get a 10% discount. just kidding.
As luck would have it, I found www.thecuttingboardfactory.com today. I bought at 1979 Grady White Overnighter in the spring and am in the process of making it mine. The anchor locker lid rotted away years ago. I found "Joe" at the factory today. He recommended a 3/4" piece (27x24) to cover the locker and said I could cut it, drill it, etc. Price was reasonable. Go to their website and give them a try. They have all kinds of stuff. Mention my name and get a 10% discount. just kidding.
Kitchen Remodel Contractor
Have son who worked for a kitchen remodel contractor. One year he gave whole family cutting boards made from scraps of "Corian" which was being used for counter tops. They have lasted for years, resist everything and easy to clean. Should be cheap too. Mike T.
Have son who worked for a kitchen remodel contractor. One year he gave whole family cutting boards made from scraps of "Corian" which was being used for counter tops. They have lasted for years, resist everything and easy to clean. Should be cheap too. Mike T.
Cutting material
Try a local plastics distributor. In Milwaukee, I've gone to Midland Plastics for material used in replacement hatch boards (high density), smoked hatch panel, (polycarbonate), replacement winch bushings (delrin), foot support block by the wheel (high density), traveller track spacing (PVC flat stock), winter cover blocks (seafoam board), etc.
Try a local plastics distributor. In Milwaukee, I've gone to Midland Plastics for material used in replacement hatch boards (high density), smoked hatch panel, (polycarbonate), replacement winch bushings (delrin), foot support block by the wheel (high density), traveller track spacing (PVC flat stock), winter cover blocks (seafoam board), etc.
- Status