Dropped a flange half for my Furlex 100S into the water while trying to grease the bearings. Might anyone have one they can part with? Part number is 539-358-01.
Thanks all!
Thanks all!
Coverplate for Furlex 100s
- Thread starter Ben Wiles
- Start date
I was able to find it on several websites but the cost IMHO was out of line. I even tried a handful of riggers for a used cover but they didn't seem to want to do business with me for such a small (used) item. I opted to try a 3D printing service offered by our local library. Cost was $2.90Cdn (approx $2 USD)/piece. So I bought 2. I really really tried to make them fit but even though they looked perfect and were ever so close, I just could not quite get the 2 pieces to lock together. (Note: i could probably have glued them together but being a little lot OCD I tossed that idea) So I ended up purchasing a new one from a local chandler at a cost of $62 (approx $45 USD) for 1/2 bottom flange plate.
This a link for the 3D printer file that you will need:
Furler 100S Flange (Selden)
Here is a link for the one I purchased:
Half Bottom Flange Plate - 539-358
And one for a much cheaper item price but shipping to Canada was crazy:
Selden Tack Swivel Half Flange w/ Labels for 100S Furlers
This a link for the 3D printer file that you will need:
Furler 100S Flange (Selden)
Here is a link for the one I purchased:
Half Bottom Flange Plate - 539-358
And one for a much cheaper item price but shipping to Canada was crazy:
Selden Tack Swivel Half Flange w/ Labels for 100S Furlers