Cooling Hose... Universal M25 XPB

[SailFysh]

Just wondering if anybody happens to know the size and length needed for replacing the water cooling hose that runs from the water pump to the heat exchanger? Universal M25 XPB

It would save me a trip to the boat if I could pick it up on the way... thanks!

 

[Stu Jackson]

It's always kinda dangerous to depend on others for hose lengths (sizes, maybe). They could have a slightly different HX port and need different length hoses.

When I got a new HX I had to get a longer hose for one connection that was slightly different.

I recommend you measure them yourself, determine how much "a tad extra" you might need, and go from there.

Good luck.

 

[njlarry]

My hoses are 1/2" although I changed to a 3/4" thru hull and hose to the strainer intake. I would guess 3-4 feet in length?
Do you have any trouble with fan belt dust?

 

[SailFysh]

My hoses are 1/2" although I changed to a 3/4" thru hull and hose to the strainer intake. I would guess 3-4 feet in length?
Do you have any trouble with fan belt dust?

No I have not noticed any belt dust. The previous owner did a good job of keeping the engine area very clean. No belt dust has been noticed in the year I have had the boat. Thanks for the hose info... I will check mine later today.

Neal