Good Morning, I have a Hunter 45CC 2006 with the start and the house batteries both being deepcycle. I have a Yanmar diesel and a Panda diesel generator on it. I commisioned the boat the summer of 08 and have had some starting issues almost from the beginning. The first question that I have is that we have traced the cables and did find a cross connection so that you can use the house batteries to assist with starting. However it is controlled by a solenoid. So far we have been unable to find a switch that activates the solenoid. Has anyone know how this works. I have not recieved an answer from Hunter on this.
In regards to my starting issues, we have cleaned all the terminals, the battery seems to test okay, and both the genset and the diesel engine seem to be charging. At anchor I have turned off the starter battery switch in case of any drains that I don't know about and have still had the problem.
Any thoughts on these problems would be appreciated. Thank you.
In regards to my starting issues, we have cleaned all the terminals, the battery seems to test okay, and both the genset and the diesel engine seem to be charging. At anchor I have turned off the starter battery switch in case of any drains that I don't know about and have still had the problem.
Any thoughts on these problems would be appreciated. Thank you.