I have an ODay 302 and had a reputable guy install new mast lights and wiring when my mast was down this winter. I have conduit that comes in section and slides into grooves in the mast. They are 5’ to 8’ sections. The conduit popped out while installing the wire. The guy had a hard time getting it back in. My first sail sections came undone. What I think I have is two section at the bottom on the mast. Anyone have any knowledge around this type of conduit as to why it would pop out. Is there a trick or something to be aware of when installing or is this common for this type of conduit. What I can see lookeded in decent condition. Also do you think it is reasonable to ask the guy to pay for the fix.