cockpit drain scuppers

Status
Not open for further replies.
M

Mike

The cockpit drain scupper fittings on my O'day 28 are slighty higher than the drain trough in which they lay. As a result there is always a bit of water sloshing back and forth in the trough. I was on a boat last week ( I can't remember the model to save me) and the scupper fittings were flush with the floor. Kinda' like a funnel with threads on it. If anyone knows where these fittings can be obtained I am interested to get that tidbit of information. For some reason the boat type listed is for a 31 even though I selected 28. this has happened before so know this post is for a 28' boat. Thaks to all.
 
C

Chuck

Scuppers

I just replaced the scupper hoses on my 1983 O'Day 28 and the deck fitting is recessed just below the cockpit deck by about 1/4 inch or so. Yours sounds like it's different from mine. My deck fittings are just ordinary through hulls. What year is your 28?
 
C

Chuck

Scuppers

Can the 1980 be that different from the 1983? The deck fittings on my 28 are just 1" straight through hulls available almost anywhere including West Marine. I have no water accumulation problems on my cockpit deck. Sorry I can't help more.
 
M

Mike

Thanks Chuck

Chuck: Thanks for the info. I'll check with West Marine, etc. for a better scupper. "Better Scupper" sounds like it ought to be a brand name doesn't it? Regards, Mike S/B Pitterpat, Lake Huron
 
Status
Not open for further replies.

Top Bottom