Check out my doors for 9.2C

[Calypso]

I made these doors for Calypso. They are teak and bronze tint 1/4 plexiglass which can slide up from the back side to use a screen. Cetol Marine Teak is the finish.

 

[BobM]

VERY nice.

 

[BobT]

Yes, nice work! But hey, I've been pondering a halyard bag just like the ones you have mounted beside the companionway. Homemade?

 

[Calypso]

They were on the boat when we bought it. They look easy enough to make. However, I don't use them and am actually considering removing them. When you lean against the bags at anchor they're pretty uncomfortable depending on what's in them.

 

[hfmckevitt]

Doors

I made these doors for Calypso. They are teak and bronze tint 1/4 plexiglass which can slide up from the back side to use a screen. Cetol Marine Teak is the finish.

Nice doors, I have a 1981 9.2C it appaers that they are the same style and size. Would you happen to have a draing of the doors you made and would you be interested in sharing it.

Thank you
Henry
hfmckevitt@comcast.net

 

[Calypso]

I just started with tracing the opening on posterboard, then made a prototype set from 3/4 plywood and made all the measuring mistakes on them. Not until then did I touch the teak!$$

 

[hfmckevitt]

Thanks

I just started with tracing the opening on posterboard, then made a prototype set from 3/4 plywood and made all the measuring mistakes on them. Not until then did I touch the teak!$$

I beleive I will make a set myself, I send you a phot when I'm done

Thanks again for the idea

Henry