I'm looking for the spigot dimensions for the upgraded chain plate covers for the above boats. Want to see if I can use on my S2....Cat Direct only gives depth and overall dimensions.
Chainplate covers - catalina 34/36
- Thread starter Mark Maulden
- Start date
Mark, there's a guy who did a redesign for the C36 chainplates. While I don't have the dimensions, you might be able to find them in posts he's made:
Tony Germin
[FONT="]1997 C34 #G697
[/FONT][FONT="]Google is your friend.[/FONT][FONT="]
I'll look on our C34 website, IIRC he posted there, too. I'll let you know.[/FONT][FONT="]
[/FONT]
Tony Germin
[FONT="]1997 C34 #G697
[/FONT][FONT="]Google is your friend.[/FONT][FONT="]
I'll look on our C34 website, IIRC he posted there, too. I'll let you know.[/FONT][FONT="]
[/FONT]
Mark, found it. Go to our C34 Forum, type in germin in the search box. He's made four or more posts. Maybe something in there for you.
http://c34.org/bbs/index.php/board,11.0.html
Good luck.
http://c34.org/bbs/index.php/board,11.0.html
Good luck.
Thanks Stu. I was thinking more inline with the chainplate cover so I can get more vertical space for sealant. (Tape). The Catalina design is quite different than the S2 design. For S2, the only connection to the deck is the outside cover (no connection to plate) that the Catalina chainplate cover might replace. The loads will not move the deck. Check out my interior pix on the S2 forum to see the plate design. I'll call CD tomorrow.