Catalina 310 Engine Panel

[John J.]

When I shut down the engine yesterday I was expecting to hear the usual alarm indicating to turn off the key. There was no alarm, and when I tried to restart, there was no power at all to the panel. Can anyone give me a good place to start. I love the boat, but in it's first year I don't think I have had all guages and insturments work at the same time. (My dealer closed his doors, so no help there)

 

[Rick]

Jiggle wires

Try disconnecting and reconnecting the harness connectors. There should be a wiring harness with an end behind the instrument panel and another end in the engine compartment. While disconnected check the pins for signs of corrosion.Good luck

 

[Malcolm]

Silly Suggestion

I'm not sure but I think there is a 10 amp breaker on the bottom of the instrument pod they may be worth a look if you haven't already tried it. Other than that just the usual check of all connections, I found the main battery leads on our 310 to be quite loose as well as those on the back of the 1 2 all switch. Good luck in finding the problem.