I acquired a mid 1970's Catalina 22 with all the woodwork, fasteners, trim, everything removed. The forward port and starboard bulkheads were starting to delaminate so I have cut new plywood bulkheads. My question is, how are these attached to the boat? It looks like there were several screws along the bottom of the bulkhead that went right into the fiberglass seatback. (Any wood backing material behind the fiberglass?? Were these stainless oval head screws with a finishing washer? Is that the only attachment point? No tabbing on these bulkheads or anything? Any photos of the fasteners and where they are located for the port and starboard bulkheads would be appreciated.
Thanks in advance!
Thanks in advance!