Cars for my t-track

Status
Not open for further replies.
Jun 14, 2005
165
Cal 20 Westport CT
My boat's pretty old! It has 1" t track installed for the jib cars, (not just on the mast for spinnaker attachments). I actually have both inside and outside tracks on my cabin top, plus further tracks alongside the cockpit (for my genny). It would be a lot of track to replace!

I broke one of my fairlead cars, and need a replacement. To be specific: it's a car that runs on a 1" t track, with a swivelling fairlead attached to it. (A car with a block on a spring would be a possible alternative, although I'd prefer the rigidity of the fairlead.)

Anyone know a manufacturer that makes more than the standard spinnaker cars for 1" t tracks? The usual suspects (Ronstan, Harken, Schaeffer, et al) don't seem to.
 

Tim R.

.
May 27, 2004
3,626
Caliber 40 Long Range Cruiser Portland, Maine
Garhauer. I believe SBO sells some of their products here and you can also check out their website.
 
Jun 14, 2005
165
Cal 20 Westport CT
Garhauer would be great

Tim:

I hope you're right. I swear by Garhauer. My boat carries their rigid vang, which I recommend constantly on this site. Plus a bunch of blocks and other items. They're courteous, knowlegeable, helpful… and cost less than the other guys. (Unpaid plug!!)

I've sent them an email. I'll let you know what they come up with.
 
Feb 26, 2004
23,353
Catalina 34 224 Maple Bay, BC, Canada
Most boat suppliers don't do email very well. Check their website out, figure what you want, and then use a telephone to call them. Garhauer is great to work with, or you can order from SBO right here.
 

DougM

.
Jul 24, 2005
2,242
Beneteau 323 Manistee, MI
I've got lewmar cars that run on one inch tracks. I would assume they still make them. Try their website. and also check if SBO can get them.
 
Jun 14, 2005
165
Cal 20 Westport CT
Thanks, everyone

There's a whole bunch of great ideas here. I really appreciate everyone's time and effort.

Nereussailor looks like he may have exactly the item I need, plus an offer that can't be refused. So I'm checking the details (track size) with him. Probably, my problem's solved.

Otherwise, I'm going to check the other vendors you've recommended. I think I'll start with Garhauer, because I really like their service. Then I'll check out the others.

Thanks again everyone.
 
Status
Not open for further replies.