Can anyone in the S.E. Mass. area fix my Yanmar?

Status
Not open for further replies.
A

Ameribritalia

I have had no luck in having anyone fix my 1 cylinder 1976 Yanmar. The first technician charged me $250.00 for telling me he can't get it started but he could overhaul it for $2000.00 that is if I can provide the crane to take it out of my boat! You mean to tell me these techs. don't have the proper equipment to take out a little 1 cylinder engine!! In this part of New England we call them "Ham and Eggers". I knew the engine needed work but god, it's as if I need to get NASA in for a briefing first!!
 
Jun 2, 2004
1,077
Several Catalinas C25/C320 USA
Yanmar

Try contacting the regional Yanmar folks for MA at: http://www.torresen.com/ or 231-759-8596 or Yanmar US: 770-877-9894. Yanmar if very restrictive, their dealers can service and sell only to customers in their own geographical area.
 
Sep 30, 2004
40
Pearson P303 Mt Sinai, NY
Yanmar - YSM?

I think I have the same engine as yours, mine is a '78 YSM12 Yanmar. Mine was seized and I needed to remove it from the boat to get it rebuilt as a winter project. My yard was closed for the winter (no crane) so I had to rig a block-n-tackle off my boom and hoist it out that way. Be careful and make sure the boat is balanced correctly. Also, support the boom with a haylard from the mast. $2k sounds like a good rebuild price - what does that include? Mine cost around $3k and included a brand new head, injector, gaskets and bearings - she runs like a champ now. You could also try OldPort Marine - I think they are located around Newport - is that near you?
 
Jun 2, 2004
27
Hunter 27_75-84 Red Bank, NJ
One man and his thoughts

I have the same engine. Complete rebuild was about $2000.00, new head,injector,hoses etc. Not to much to it other than parts. The old Yanmar block is heavy and thick. Why did the individual feel it had to be pulled? Mine was all done in water, 1977 Hunter 27. Good luck, Peter
 
Jun 4, 2004
133
- - Plymouth
Re: One mans thoughts...

Peter, does your 27 have space to access the engine? By the way, my corporate office is in Red Bank, Montauk Financial. Been to the Molly Pitcher Inn? Nice bay!
 
Jun 7, 2004
114
Hunter 34 Weymouth, Ma
Well you should call J-WAY enterprises

located in Scituate Ma... He has worked on my boat at my house in Pembroke. He can pull that engine out in a hour or so if needed to rebuild. His number is 781-544-0333.. I would call him right away as he will be very busy soon.....He is a great guy too..
 
C

Clamhead

Engine Rebuild

I would give Dry Dock a call and see what they say. They have always done right by me. Dry Dock Marine Corporation 447 Station Avenue, South Yarmouth, MA 02664 (508) 398-2824
 
Status
Not open for further replies.